Description
Bottomline
- Compatible with sensorless brushless motors and sensored brushless motors (only in sensorless mode).
- Fully waterproof design for all weather conditions.
- Super internal switch-mode BEC with switchable voltage of 6V/7.4V and a cont. /peak current of 6A/25A for easily driving big torque servos and high voltage servos.
- Highly reliable electronic switch avoids troubles which may happen to traditional mechanical switch due to dirt, water, dash and etc.
- The built-in spark-proof circuit effectively protects not only battery and ESC connectors from damage but also users from physical injury (to hands) caused by strong electrical sparks
- produced at the battery and ESC connecting moment.
- Separate programming port to easily connect the LED program card or the LCD program box to the ESC. (purchase separately)
- Proportional brake with 9 levels of brake amount/maximum brake force and 9 levels ofdrag brakeforce.
- 5 levels of acceleration /punch from soft to aggressive for different vehicles, tires and tracks.
- Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, andfail-safe(throttle signal loss protection).
- Capacitor Protection(Only MAX5)Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC because of overload.
- Single-button ESC programming and factory reset.
- Advanced programming via portable LED program card or multifunction LCD program box. (purchase separately)
- Firmware upgrade via HOBBYWING multifunction LCD program box (item sold separately).
Specifications
| MAX6 | |
| Scale Vehicles | 1/6th, 1/7th |
| Cont./Peak Current |
160A/1050A |
| Motor Mode | Sensorless |
| Input | 9-24 Cells NiMH 3-8S Lipo |
| Motor Limit | 6S:KV1500 8S:KV1200 (Motor Size:5892) |
| BEC Output | 6V/7.2V adjustable, 6A |
| Programming Port |
Same |
| ESC Programming | Same |
| Switch Mode | Same |
| Capacitor protection |
Yes |
| Waterproof | Yes |
| Size (L.W.H) mm |
70.0/56.0/46.5 |
| Weight g |
240g |
Manual Download..
User’s Manual Download
Recommended product..
- Ezrun Motor (1/6th, 1/7th)
- OTA Programming Device
- LCD program box
- LED program card for Ezrun Max ESC
- Cooling Fan
- Hobbywing Lifestyle
HOBBYWING’s new RTR upgrade ESC specially develops on the basis of constant research, technical analysis and performance comparisons, available via the authorized dealer.
CEN GST-E upgrade, Traxxas XO-1, LOSI 5IVE UPGRADE
Learn more..
IMPORTANTCHECKLIST:
- Ensure all wires and connections are well insulated before connecting the ESC to related devices, as the short circuit will damage your ESC.
- Ensure all devices are well connected, in order to prevent poor connections that may cause your vehicle to lose control or other unpredictable issues like damage to the device.
- Read through the manuals of all power devices and chassis and ensure the power configuration is rational before using this unit.
- Please use a soldering iron with the power of at least 60W to solder all input/output wires and connectors.
- Do not hold the vehicle in the air and rev it up to full throttle, as rubber tires can expand to an extreme size or even crack to cause serious injury.
- Stop using the ESC when its casing temperature exceeds 90/194; otherwise, your ESC will get destroyed and may also get your motor damaged. We recommend setting the
- ESC Thermal Protection to 105/221 (this refers to the internal temperature of the ESC).
- We recommend removing the cooling fan from ESC before exposing the vehicle to liquids and fully dry it right after the use.
- Always disconnect and remove batteries after use, as the ESC will continue to consume current if its still connected to batteries (even if the ESC is turned off). Long-time contact will cause batteries to completely discharge and result in damage to batteries or ESC. This will not be covered under warranty
